• Name:

    Bloody Valentine Cyphastrea

    (View AKA's)
  • Family: Faviidae
  • Species: Cyphastrea
  • Scientific Name: Cyphastrea sp
More Details

Also Know As:

| Meteor Coral

General info about Bloody Valentine Cyphastrea

In general, species from Cyphastrea are fast growing when you compare it to other mound-building corals. They usually grow in an encrusting form and can visually see a difference in size within 6 months. Newbies can cultivate Cyphastrea since they are easy to care and maintain. They can grow in a wide range of water condition and are noted to survive even in low nutrient level.

For the Bloody Valentine, they are predominatly colored purple with yellow red circles at the tips. This are the water parameters for cultivating Bloody Valentine:

  • Calcium: 420 - 440 ppm
  • Alkalinity: 2.8 - 3.39 MEQ/L (8 - 9.5 dKH)
  • Phosphates: < 0.1 ppm
  • Nitrates: > 10 ppm
  • Magnesium: 1260 - 1350
  • pH: 8.1 - 8.4
  • Temperature: 75° - 80° F (23° - 27° C)
  • Salinity / Specific Gravity: 1.024 - 1.026 but ideally at 1.025 for maximum growth

Note: incase you have an algal outbreak in your tank, all you need to do is to gradually increase the magnesium level at 1400 - 1600 ppm. We also recommend doing a water change to combat the negative effects, especially if the nitrate level exceed 10 ppm.

Bloody Valentine Cyphastrea Diet & Nutrition

While they enjoy the photosynthetic benefits brought by the symbiotic zooxanthellae living inside them, Bloody Valentine still needs supplemental feeding such as mysis, artemia, copepods and other nauplii.

Fragging / Propagating Bloody Valentine Cyphastrea

A mature tank is highly recommended in propagating Bloody Valentine. In setting them in the tank, you need to place them over an exposed rock where they can start their encrusting process. Putty or gel glue can be used to firmly mount them.  For best results, we recommend you place them in the lower portion of the tank where there is moderate water flow and moderate lighting.

Flow / Lighting Requirements for Bloody Valentine Cyphastrea

The Bloody Valentine DOES NOT require strong water flow and intense lighting. Usually placing them on the lower level of the tank would do the trick.

Bloody Valentine Cyphastrea Origin

The Bloody Valentine is widely spread throughout the waters of the Indo-Pacific Ocean.

Caution Should be Taken with Bloody Valentine Cyphastrea

Do not place the Bloody Valentine on the upper part of the tank. By doing so, you will expose them to high water flow and intense lighting, which in effect, causes a stunted growth.

How to Acclimate Bloody Valentine Cyphastrea

Bloody Valentine are purely marine, therefore, salinity must be maintained thoroughly at 1.024 to 1.026 specific gravity. But for best results, maintan the salinity at 1.205 specific gravity. They should be placed in their permanent position immediately after acclimation to facilitate the encrusting process.

Stinging Tentacles on Bloody Valentine Cyphastrea

Bloody Valentine have a semi-aggressive behavior and may invade nearby polyps from other coral species by extendng their tentacles. So, proper spacing in between corals should be maintained.  

Relevent Articles

Original Detail

Name Species Family Scientific Name More Detail Added by
Bloody Valentine Cyphastrea Cyphastrea Faviidae Cyphastrea sp

In general, species from Cyphastrea are fast growing when you compare it to other mound-building corals. They usually grow in an encrusting form and can visually see a difference in size within 6 months. Newbies can cultivate Cyphastrea since they are easy to care and maintain. They can grow in a wide range of water condition and are noted to survive even in low nutrient level.

For the Bloody Valentine, they are predominatly colored purple with yellow red circles at the tips. This are the water parameters for cultivating Bloody Valentine:

  • Calcium: 420 - 440 ppm
  • Alkalinity: 2.8 - 3.39 MEQ/L (8 - 9.5 dKH)
  • Phosphates: < 0.1 ppm
  • Nitrates: > 10 ppm
  • Magnesium: 1260 - 1350
  • pH: 8.1 - 8.4
  • Temperature: 75° - 80° F (23° - 27° C)
  • Salinity / Specific Gravity: 1.024 - 1.026 but ideally at 1.025 for maximum growth

Note: incase you have an algal outbreak in your tank, all you need to do is to gradually increase the magnesium level at 1400 - 1600 ppm. We also recommend doing a water change to combat the negative effects, especially if the nitrate level exceed 10 ppm.

PalaciosAn

Changed by users

Submitted Date Submitted By Status Action